Supply of new steel straightening machine machinery manufacturers a price Jian Xiang, the machine is suitable for 380 ⅴ, frequency of 50Hz, three-phase power. Please check before using the power used by the machine meets the requirements. Check before operating equipment distribution box Wiring connectors are all solid, screw loose parts, make sure the device is placed smoothly, there is sufficient room for maneuver. 2, Connect the power supply and power distribution box, power on, let idle equipment, inspection equipment any abnormal sound and adjust the running direction. 3, everything is ready, a person will be cleaned by the import into the pipe, from the exit of another person pick out a good half-pipe need to be stabilized. Note that there are burr joints, pipe bending die, can not enter the equipment handling, to avoid damage to the device. 4, in the steel rust process, such as cleaning effect is mainly the first cut off the power, open the cover on the part of the equipment rust, wire brush adjustment after adjustment tighten each nut to avoid equipment failure. 5, the need for straightening the steel should be unified time operation, do not use paint machine. 6, the device during operation, if the belt is loose appear to be cut off, adjust the expansion bolts, making normal. 7, after each use, the box must be cleaned, pump, tubing and other locations with pine fragrance, to ensure that the next normal use. Company Name: Xingtai Jian Xiang Machinery Manufacturing Co., Ltd. Address: Xingtai City, Hebei Xing Ren County Chichiawan Contact: The Manager's hotline 0319 -7,522,622 Mobile: 18731949765 welcome to inquire!